Overview of standard plans process

Learn the revision and approval process for standard plans.

Standard Plans
The Standard Plans for Road, Bridge, and Municipal Construction (M 21-01) is updated continuously. The Design Standards Team has lead responsibility for keeping this manual current. Several things prompt these revisions:

  • Changes in laws, regulations and policies
  • Requirements to keep pace with evolving technology
  • Requirements to align with policy documents from federal transportation agencies

Project contracts refer to individual plans, and the Standard Specifications refer to the contents of the Standard Plans Manual, in general. In addition to being a legal document referred to during project construction, this manual is also used in the Plans, Specifications & Estimates (PS&E) phase. The plans in this set agree with and complement statewide design (Design Manual) and construction policies.

A plan or revision undergoes rigorous processing before being included in the manual. The steps include:

  1. Subject matter experts from the following disciplines develop and/or review the plans: materials, structures, traffic, construction, environmental, project control & reporting, strategic planning and programming, maintenance and operations, transit and others.
  2. WSDOT staff and other agencies, such as the American Public Works Association, conduct a statewide review.
  3. After responding to those comments, we apply for its approval by the Division Office of the Federal Highway Administration (FHWA).
  4. First signed through the stamp by a licensed engineer, then signed by the State Design Engineer approving it for publication.
  5. Future Standard Plan is produced.

Future Standard Plans
Future Standard Plans are those approved for publication by the State Design Engineer and awaiting the next installment of a revision package (roughly an eight month cycle) before they may be referenced from a contract. These are located on the Standard plans page as they become approved. Because they are new or supersede existing Standard Plans, familiarity with this set is indicated during current project design.

A Future Standard Plan may be included in a forthcoming contract as a detail sheet. The Standard Plans Manual Archive is a recent service provided to facilitate finding the valid Standard Plans as referenced in a project’s contract. Individual plans may vary in their content with each successive revision package / manual version, and are identified by their Approved for Publication signature date. Because the manual is loose leaf, allowing it to be renewed, outdated plans are (expectedly) discarded while (paradoxically) they might still be needed. It is at times necessary to produce the intended version of a Standard Plan for a particular contract. The General Special Provisions within the contract states inclusion of the Standard Plans Manual and specifies which one by its effective date. Listed by this date, complete preceding manuals are now available through the Standard Plans page.

Plan Sheet Library
This resource provides drawings that are precluded from adoption as Standard Plans. These details, plans, or layouts may be used whole or in part as an aid to contract plan set composition. Among this collection may be introductory or experimental items where the intent is design direction/guidance, site-specific details requiring some customization, obsolete Standard Plans that have details still necessary for repair/maintenance or extension activities, Local Agency details (excluded from state application), etc. A special effort to control or qualify the use of an item, or to assure its distribution and availability, would also place it here. Developed in collaboration with engineering specialists and reviewed by the Headquarters Development Division, these drawings fully comply with present design criteria. Each drawing is featured on an individual web page with any necessary description, explanation, statement of intended use, comments, caveats, etc. There is also an illustration or photo of the item, links to electronic versions of the plan and any special provision.

What is a standard plan? The Standard Specifications for Road, Bridge, and Municipal Construction defines Standard Plans as “A manual of specific plans or drawings adopted by the Contracting Agency which show frequently recurring components of work that have been standardized for use”. The Washington Federal-Aid Stewardship Agreement of 2001 states that, “FHWA approval is required for all standard plans, amendments, and general special provisions, intended for use on Federal-aid construction projects on the NHS.”

The Department of Licensing requires that all plans stamped and signed by a Professional Engineer must be developed under the direct supervision of that engineer. Said engineer must be knowledgeable in that specific area of engineering. All standard plans are stamped; therefore, each must comply with these stipulations.

Each Standard Plan must adhere to WSDOT Design Policies, the Stewardship Agreement, construction practices, and the Department of Licensing requirements.

A standard plan as a statement of Design Policy must comply with the following:

  • WSDOT Design Manual
  • WSDOT Local Agency Guidelines (LAG)

Manual

  • WSDOT Bridge Design Manual
  • WSDOT Hydraulics Manual
  • WSDOT Roadside Manual
  • AASHTO A Policy on Geometric Design of Highways and Streets
  • AASHTO Roadside Design Guide
  • AASHTO LRFD Bridge Design

Specifications

  • AASHTO Standard Specifications for Structural Supports
  • ADAAG guidelines for ADA accessibility
  • US DOT Manual on Uniform Traffic Control Devices
  • Uniform Building Code
  • National Electrical Code
  • NCHRP (National Cooperative Highway Research Program) Report 350
  • Revised Code of Washington (state laws)
  • APWA (American Public Works Association) standards
  • WA State Department of Labor and Industries worker safety regulations
  • WA State Department of Licensing PE stamping requirements
  • Various National design publications for special user groups (Pedestrians, Cyclists, Transit, etc.)

A standard plan as a Construction Standard must comply with the following:

  • WSDOT Standard Specifications for Road, Bridge, and Municipal Construction
  • Amendments to the Standard Specifications and General Special Provisions
  • WSDOT Construction Manual
  • WSDOT Plans Preparation Manual
  • WSDOT Sign Fabrication Manual
  • WSDOT Qualified Products List
  • WSDOT Modifications to the MUTCD
  • ASTM (American Society for Testing and Materials) specifications
  • Various Trade Association construction requirements

8,683 animals crossed the Snoqualmie Pass East Project area

as recorded by WSDOT and partners in 2020 and 2021.

46% increase in Amtrak Cascades ridership to 251,000 passengers

in 2021 compared to 172,000 in 2020.

Nine wetland and stream mitigation sites across 32.7 acres added

to our monitoring program in 2021 to help offset climate change impacts.