Define the girder spacing.

Click on the combobox to select between defining parameters for the entire bridge and for just this span.

Item	Description
Number of Girders	Enter the number of girders
Girder Spacing	Use the drop down list to select how and where the girder spacing is measured
Girder Spacing Grid	Enter the spacing between girder lines
Locate	Use these parameters to transversely locate the girders
[Copy to End/Start of Span]	Press to copy the girder spacing information to the opposite end of the span

Using the Grids

Use the grouping features to create groups of girders or spacing.

The grid can be expanded to provide a column for each by selecting the column heading, right clicking, and choosing the Expand command

Select columns to join together, right click and choose the Join command

Transversely Locating Girders

The girders must be located transversely with respect to the alignment. The location of the girder is measured in the same direction, and along the same line, as the girder spacing.

Item	Description
Locate Drop Down List	Select a specific girder, or "Center of Girders", to locate transversely. "Center of Girders" is the mid-point between the centerline of the left and right exterior girders
Location	Enter the location of the selected girder
From Drop Down List	Select the location from which the selected girder is measured.