It is common practice for precast girder bridge designs to have all girders detailed identically. Copy Girder Properties provides a convenient method for copying the properties of one girder to other girders in the structure.

Copy Properties From

Select the source girder whose properties you wish to copy

Copy Properties To

Select the target girder(s) to which the properties will be copied. Target girders can be selected with either of two options.

Option	Description
Single Girder, Span, Girderline or All	Using the drop down lists to select the target girders
Multiple Girders	Press [Select Girders] to select several target girders

Select Types of Properties to be Copied

Check the box next to the properties to be copied.

Property	Description
Copy Concrete Material Properties	When checked, the properties of the girder concrete will be copied.
Copy Prestressing	When checked, both pretensioned and postensioned (if present) prestressing strand information (quantities, locations, jacking forces, debonding, etc.) will be copied. For bridges using several types of girders, prestressing information can only be copied between girders that are of the same type.
Copy Longitudinal Reinforcement	When checked, the longitudinal reinforcement will be copied. For bridges using several types of girders, longitudinal reinforcement can only be copied between girders that are of the same type.
Copy Transverse Reinforcement	When checked, the transverse shear reinforcement will be copied.
Copy Handling Locations	When check, the location of the lifting loops and the transportation support points will be copied.
Copy Slab Offset ("A" Dimension)	When check, the slab offset is copied.

Control Buttons	Description
[Copy Now]	Press this button to copy the properties.
[Close]	Close this window without copying properties
[Help]	Opens this help topic.