Add or edit a user defined concentrated (point) load.

Item	Description
Load Case	Select the Load Case that the load is to be applied in. The available options are DC, DW and LL+IM as defined in the LRFD Specifications. LL+IM can only be applied in Event 5: Final with Live Load (Bridge Site 3).
Event	Select the construction event when the load is first applied. In PGSuper all user-defined loads are permanent and their results are accumulated through all subsequent stages.
Span/Girder	Select the span and girder that the load is to be applied to. You can select "All Spans" or "All girders" to apply the load to more than one girder.
Location	Select the location along the girder, measured from the left support, where the load is to be applied. The load must be applied within the span length of the girder. If it is not, the load will be ignored in the analysis and a message stating so will be placed in the Status Center. If the Fractional Measure option is checked, the load will be located from the left support using a fraction of the span length.
Magnitude	Enter the magnitude of the load. Positive loads are applied in the direction of gravity.
Description	Enter a description for this load