Define general information about the girder

Events

Select the construction events for this girder.

Item	Description
Construction	Select the event when this girder is constructed
Erection	Select the event when this girder is erected

Girder Type

Define the girder type.

Item	Description
Girder Name	If unique girders are used throughout the bridge, select the name of this girder from the drop down list. Click on the combo box control to change how girders are defined in the bridge.

Define the concrete properties.

Item	Description
f'ci	Enter the concrete release strength
Eci	When checked, enter the modulus of elasticity at release. Otherwise, the modulus of elasticity will be computed by the AASHTO equation.
f'c	Enter the design concrete strength
Ec	When checked, enter the design modulus of elasticity. Otherwise, the modulus of elasticity will be computed by the AASHTO equation.
[More Properties...]	Press to define detailed concrete properties or select a pre-defined concrete from the library

Use the combo box to control how fillets are defined for the bridge. Enter the fillet value for this girder if unique fillets are defined per girder.

Use the combo box to control how slab offsets are defined for the bridge.

Item	Description
Start of Girder	Enter the slab offset at the start of the girder
End of Girder	Enter the slab offset at the end of the girder

Select the condition of the girder from the drop down list. If "Other" is selected, enter the condition factor.