Span Description

Define general information about the span.

Span Length

Item	Description
Span Length	Enter the span length measured along the alignment between the abutment/pier lines at either end of the span.

The length of the span is changed by moving all the up-station piers.

Haunch Geometry

Define the geometry of the slab haunch

‍A complete description of vertical bridge geometry, haunch design, and haunch input methods can be found at Geometry - Vertical Design

Different options are shown depending on the selected haunch input method

"A" and Assumed Excess Camber Method (PGSuper Only)

Item	Description
Slab Offset ("A" Dimension)	Enter the slab offset dimension for the span.
Assumed Excess Camber +	Enter the excess camber that is used to define the parabolic haunch depth used for computing composite section properties and/or haunch dead load. Note that this option is only available if the parabolic option is selected for computing composite section properties or haunch loading in the current Project Criteria library entry.

Explicit Haunch Depth input method

Item	Description
Haunch Depth	Haunch depth is shown when applicable

Edit Haunch Description....

Click on this button to bring up the Haunch Geometry Dialog